| 品牌 : | 伯朗特 |
????先看視頻：一、不會疲勞1、使用機械手取制品，射出成型機可以無人看守操作，不怕無人或員工請假之顧慮。2、實行一人一機制（包括剪水口、削披峰和打包），配備輸送帶，一人可看4-5臺機，大量節省人力，減少工人工資。3、人會疲勞，而機械手出產品的時間是固定的，不用休息，尤其是天熱或夜班效果更加明顯。4、招高文化人員操作注塑機比較困難，成本增加，而普通生技人員技術性不高，責任心不強，造成生產和管理困難。5、人與人相處總會產生矛盾，影響生產。使用機械手減壓少了人工，內部不會因工作壓力太大而產生矛盾，提高內部團結和公司的凝聚力。二、安全1、因勞工法不斷健全和嚴格，使用機械手不再會有員工意外傷害的風險。2、人較少接觸產品，避免因產品過熱而造成員工 。3、不需要用手入模具取產品，避免因此造成的安全***。4，揚州智能伯朗特機械手、機械手電腦內設有模具保護，揚州智能伯朗特機械手，模具內產品沒有脫落會自動報警提示，不會損壞模具。三、品質1、如成型機為自動脫模，掉落時會產品刮傷，沾到油污而產生不良品。2、如人取出產品有四點問題存在：一、有可能手會刮傷產品，二、有可能手不干凈而弄臟產品，揚州智能伯朗特機械手，三、如多穴漏取而壓壞模具。四、因人員疲勞而影響周期，降低生產效率。
三軸/五軸伺服橫走式機械手BRTR系列機械手臂適用120T-1200T的各型臥式射出成型機，手臂形式是雙截式，分3軸及5軸AC伺服驅動。取出時間 少1.2ec，全循環 少5.5sec應用于快速取出或是模內貼、模內篯件等特殊產品應用華成三/五軸專用 CANOPEN總線通訊方式:信號線少，遠距離通訊，擴展性能好，抗干擾能力強，重復定位精度高，可以同時控制多軸，設備維護簡單，故障率少。 BRTR Series is applicable to all types of horizontal injection machineranges of 120T-1200T for take-out products and sprues Vertical arm istelescopic stage. Full AC servo motor driven on each axis, Productstake-out at super high-speed at most 1.2sec. and dry cycle time at most
5.5seconds, applicable to take-out products with short forming cycleor complex automatic. Also with the function of mold labeling and mold
inserting
HC three-axis/five axis CANOPEN connecting way
Less connecting line, long distance communication, good expansibilility,.strong anti-interference ability, high repeat precision, cansimultaneously control multi axis, simple equipment maintenance, lowfailure rate
BRTV Series Robot is applicable to all types of horizontaliniection machine of 100T-650T for take-out products. Theinstallation direction is different from traditional beamrobot, products and sprues are placed at the end of IMM.Ithas single stange and telescopic type: lt can be added a sub-arm for 3-plates mold to grip products and sprue at the sametime, vertical stroke: 800-1000mm, Install BRV robot can save30-40% room to allow better utilization of productionspace: Furthermore, the productivity will be increased20-30%, reduce defective rate, ensure safety ofoperators, reduce manpower and accurately control theoutput to reduce waste
